Silica Spraying Problems

Silica Dust Control

Why Conventional Spraying Doesn’t Work for Silica Dust

OSHA’s final rule for outdoor dust suppression is unfortunately incomplete and potentially expensive. The rule states that material-handling workers need to frequently pause from their work to lightly spray water over storage piles and raw-material receiving areas for dust control, most likely using a hose.

Here’s the problem: Sprayers (including hoses, sprinklers, water trucks, etc.) create droplets that are too large to offer actual dust suppression, due to the extremely small size of silica dust particles. It’s an issue called the “slipstream effect.”


The Slipstream Effect

When a water droplet is sprayed into the air, its size and velocity cause air to rapidly flow around it, much like air flowing around an airplane’s wing. Though small, the airflow around a falling droplet (200μm to 1000μm in size) is actually strong enough to deflect and even lift a dust particle. That means the water sprayed from a conventional hose or water truck enables dust to literally “dance through the raindrops” and to avoid suppression.

Slipstream Effect for Dust Control

Trapping Silica Dust with Atomized Mist

A better approach is atomized mist droplets — ranging between 50 and 200 microns in size. These tiny drops of water linger in the air and create very little slipstream. In fact, they collide with airborne dust particles and then drive them to the ground and seal them there. It’s one of the few technologies that helps create safe and more compliant work sites by managing both airborne particle control and ground-level dust suppression.

BossTek can trap silica dust with atomized mist. This technology is the ultimate in silica dust control technology.
Atomized mist creates a wide area of airborne and surface dust control at the point of emission.

When used in tandem with a surfactant and dosing pump, the atomized mist technology is effective on an extremely wide range of applications and materials. The mist from a single machine can cover up to 280,000 ft2  (26,000 m2), while also minimizing water consumption by using less than 39 GPM (147.6 lpm).

Subscribe and Stay Up-to-Date!

Receive a monthly newsletter keeping you up-to-date on the latest in dust and odor control.