fbpx

Installation Bracket Aids Install of Conveyor Dust Suppression Ring

We've introduced a family of adjustable mounting brackets for the popular DustBoss® DB-R series of dust suppressors.

Developed in direct response to customer feedback, the new bracket design is available to suit the entire range of ring sizes from 17-100 inches, and can be installed in about an hour. The DB-R is engineered specifically for use at conveyor discharge points, designed to create a curtain of mist around the material flow for outstanding particle containment.

Because of the wide variation in conveyor designs, in the past we've left the mounting of the rings to the individual customer. But it was clear that customers looked to us for guidance. So now we've designed an adjustable bracket that can fit virtually any conveyor design, with movable arms to allow precise location of the atomized mist circle to match the specific conveyor, material and outflow.

First developed for a coal application, the DB-R fully encircles the discharging material to apply suppression directly as the flow exits the conveyor. With no moving parts, the simple yet effective engineering delivers focused dust suppression on a continuous-duty basis, able to capture fugitive particles on radial stackers and other offloading points with a durable, intrinsically safe design. The solution is straightforward but effective, and customers are finding that it’s well suited to conveyor discharge of sand, aggregates, biomass and other traditionally dusty materials.

For some bulk material handlers, it can be a very affordable alternative to more extensive dust management tactics. Larger operations are finding that the source-point suppression of the DB-R is the perfect complement to their open-area dust control measures.

The DB-R is currently available in nine standard sizes (17-100 in / 43.2-254 cm) in diameter. Available options for the DB-R include a booster pump to elevate low water pressures, a variety of nozzle sizes / configurations, and water filtration. Customers can also order the units with a 2-way valve and/or hose included.

We've introduced a family of adjustable mounting brackets for the popular DustBoss® DB-R series of dust suppressors.

Developed in direct response to customer feedback, the new bracket design is available to suit the entire range of ring sizes from 17-100 inches, and can be installed in about an hour. The DB-R is engineered specifically for use at conveyor discharge points, designed to create a curtain of mist around the material flow for outstanding particle containment.

dustboss-ring-mounting-brackets

Because of the wide variation in conveyor designs, in the past we've left the mounting of the rings to the individual customer. But it was clear that customers looked to us for guidance. So now we've designed an adjustable bracket that can fit virtually any conveyor design, with movable arms to allow precise location of the atomized mist circle to match the specific conveyor, material and outflow.

First developed for a coal application, the DB-R fully encircles the discharging material to apply suppression directly as the flow exits the conveyor. With no moving parts, the simple yet effective engineering delivers focused dust suppression on a continuous-duty basis, able to capture fugitive particles on radial stackers and other offloading points with a durable, intrinsically safe design. The solution is straightforward but effective, and customers are finding that it’s well suited to conveyor discharge of sand, aggregates, biomass and other traditionally dusty materials.

For some bulk material handlers, it can be a very affordable alternative to more extensive dust management tactics. Larger operations are finding that the source-point suppression of the DB-R is the perfect complement to their open-area dust control measures.

The DB-R is currently available in nine standard sizes (17-100 in / 43.2-254 cm) in diameter. Available options for the DB-R include a booster pump to elevate low water pressures, a variety of nozzle sizes / configurations, and water filtration. Customers can also order the units with a 2-way valve and/or hose included.

dustboss-ring-mounting-bracket
dustboss-ring-mounting-brackets
dustboss-ring-mounting-bracket

Stop conveyor dust today with the DustBoss Ring!

Receive a FREE quote and talk to a dust control specialist to equip you with the appropriate sized ring for your application!

Get A Quote

Stay up-to-date on dust control innovations...

Subscribe to BossTek!

More on BossTek

Demolition Dust Control: Rental or Owner?

By BossTek | October 16, 2019

Demolition contractors struggle with the question: when is it more cost-effective to rent dust suppression equipment rather than own it? The answer is a moving target, calculated according to the needs and finances of each individual company. In Europe, contractors use rental equipment heavily, more than 70 percent of the time by some estimates. Their… Continue Reading

Clogged Atomized Misting Nozzle Solutions and Maintenance

By BossTek | September 30, 2019

DustBoss equipment provides effective dust control using fine, atomized mist to capture dust and drop it to the ground. To create this effective dust, water goes through nozzle orifices and uniquely engineered inner geometry. The atomizing nozzles must be given proper care to avoid being clogged by fine debris particles at the orifices and inner… Continue Reading

Chat Control Podcast | Episode 10 | Off the Rails

By BossTek | September 25, 2019

WELCOME TO CHAT CONTROL! BossTek’s podcast about everything dust and odor control and whatever other topic that may come to light. Each episode, host Tyler Kempf (Account Executive) sits down and talks the latest and greatest in dust and odor technology with his fellow members of Team Boss. From recent news in the industry and… Continue Reading

Dust Control Systems for Asphalt and Concrete Recycling

By BossTek | September 16, 2019

Asphalt and concrete recyclers across America are implementing dust control to create safer environments for their workers and surrounding communities. With multiple points of dust generation, from conveyor movement and crusher breakdown, determining what dust control system to effectively suppress the dust particles can be a challenge. BossTek’s DustBoss dust control systems are designed to… Continue Reading

Atomized Mist Aids During Concrete Curing

By BossTek | August 29, 2019

For over a decade, BossTek’s DustBoss dust control systems have suppressed fugitive dust particles at job sites around the world. Anywhere there is dust, DustBoss finds a home. Frequently used in demolition, scrap metal recycling, at port facilities and more, DustBoss goes to battle with the advantage on the opposing, dusty team. As new opportunties… Continue Reading

Chat Control Podcast | Episode 9 | So Much Fast Food

By BossTek | August 19, 2019

WELCOME TO CHAT CONTROL! BossTek’s new podcast about everything dust and odor control and whatever other topic that may come to light. Every two weeks, host Tyler Kempf (Account Executive) sits down and talks the latest and greatest in dust and odor technology with his fellow members of Team Boss. From recent news in the… Continue Reading

This entry was posted in DB-R, DustBoss, News, Product Information. Bookmark the permalink. Both comments and trackbacks are currently closed.